Others
- 194 -
• Is the number of recordable pictures 2 or less?
• Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
>
>
Increase the setting for [NOISE REDUCTION] in [PICT. ADJ.] or lower the setting for each
of the items other than [NOISE REDUCTION].
>
Take pictures in bright places.
• Has [HIGH SENS.] in the Scene Mode been set? If so, the resolution of the recorded picture
decreases slightly because of high sensitivity processing, but this is not a malfunction.
• If recording under fluorescent light, the brightness or the hue may change slightly when the
shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not
a malfunction.
• This is characteristic of MOS sensors which serve as the camera’s
pickup sensors. It appears when the subject has a bright part. Some
unevenness may occur in the surrounding areas, but this is not a
malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
• It is recommended that you take pictures while taking care not to
expose the screen to sunlight or any other source of strong light.
Taking pictures using Auto Bracket is not possible.
The recorded picture looks rough.
Noise appears on the picture.
Under fluorescent lighting, flicker or horizontal bars may be seen.
• This is characteristic of MOS sensors which serve as the camera’s pickup
sensors. This is not a malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
Reddish horizontal streaks appear on the LCD monitor during recording.
