Panasonic Lumix DMCFX700EB Operating Instructions Manual Download Page 59

Page: 59 / 208

- 59 -

Advanced (Recording pictures)

∫

The available flash range to take pictures

• The available flash range is an approximation.

1 When [ISO LIMIT SET] is set to [AUTO].

2 Recording with zoom magnification of up to 4

is possible. Pictures recorded with Tele may

be darker than normal.

• In [HIGH SENS.]

(P83)

in Scene Mode, the ISO sensitivity automatically switches to between

[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 14.9 m (48.9 feet)

Tele: Approx. 1.0 m (3.28 feet) to approx. 5.6 m (18.4 feet)

• In [FLASH BURST]

(P84)

in Scene Mode, the ISO sensitivity automatically switches to

between [ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 60 cm (1.97 feet) to approx. 5.1 m (16.7 feet)

Tele: Approx. 1.0 m (3.28 feet) to approx. 1.9 m (6.23 feet)

∫

Adjust the flash output

Adjust the flash output when the subject is small, or the reflectivity is very high or low.

Touch [

], and then touch [

Adjust the flash output by touching the slide bar.

• You can adjust from [

2 EV] to [

2 EV] in steps of [1/3 EV].

• Select [0 EV] to return to the original flash output.

Touch [SET] to finish.

Touch [CANCEL] to finish.

• You can also press the shutter button halfway to finish.

Note

• When the flash output is adjusted, the flash output value is displayed on the screen.

• The flash output setting is memorised even if the camera is turned off.

• You cannot set [FLASH] in the following cases.

– In Intelligent Auto Mode

– In [SCENERY], [PANORAMA ASSIST], [NIGHT SCENERY], [HANDHELD NIGHT SHOT],

[SUNSET], [FLASH BURST], [STARRY SKY], [FIREWORKS] and [AERIAL PHOTO] in

Scene Mode

ISO

sensitivity

Available flash range

Wide

Tele

AUTO

60 cm (1.97 feet) to 7.4 m (24.2 feet)

1.0 m (3.28 feet) to 2.8 m (9.18 feet)

ISO100

60 cm (1.97 feet) to 1.8 m (5.91 feet)

ISO200

60 cm (1.97 feet) to 2.6 m (8.53 feet)

1.0 m (3.28 feet)

ISO400

60 cm (1.97 feet) to 3.7 m (12.1 feet)

1.0 m (3.28 feet) to 1.4 m (4.59 feet)

ISO800

80 cm (2.62 feet) to 5.2 m (17.0 feet)

1.0 m (3.28 feet) to 2.0 m (6.56 feet)

ISO1600

1.15 m (3.77 feet) to 7.4 m (24.2 feet)

1.0 m (3.28 feet) to 2.8 m (9.18 feet)

Summary of Contents for Lumix DMCFX700EB

















































































































































































































Search results

Summary of Contents for Lumix DMCFX700EB

Reviews:

Brands by name

Popular brands

Panasonic Lumix DMCFX700EB, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMCFX700EB

Reviews:

Brands by name

Popular brands