- 115 -
Others
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be
used]
>
Use a card compatible with this unit.
– microSD Memory Card (64 MB to 2 GB)
– microSDHC Memory Card (4 GB to 32 GB)
[Insert SD card again]/[Try another card]
• An error has occurred accessing the card.
>
Insert the card again.
>
Insert a different card.
[Read Error/Write Error
Please check the card]
• It has failed to read or write data.
>
Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to
read or write the data again.
• The card may be broken.
>
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
• Use a card with SD Speed Class with “Class 6” or higher when recording motion pictures.
• In the event that it stops even after using a “Class 6” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
• Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
• A folder cannot be created because there are no remaining folder numbers that can be used.
>
Format the card after saving necessary data on a PC etc.
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
• Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic
battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.