14
•
Step 4. Display the "INITIAL SETTINGS" menu:
Note: If the unit is other than PROGRAM AE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "INITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
There are three kinds of menu from as follows:
[Except for "EG, EF, EB, EP and GK" models : (VEP56124A is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, all of the model suffix are displayed as follows. (Four pages in total)
[Only for "EG, EF, EB and EP" models : (VEP56124B is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, the following model suffix are displayed as follows. (Two pages in total)
[Only for "GK" model : (VEP56124C is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, the only "GK" is displayed as follow.
[CASE 2. Other than "After replacing MAIN P.C.B."]
Summary of Contents for Lumix DMC-TZ20EB
