manualshive.com logo in svg

Panasonic Lumix DMC-TS5D, Owner'S Manual, Page: 264 / 277

Share
Download
Panasonic Lumix DMC-TS5D Owner'S Manual Download Page 264

- 264 -

Others

>

Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

>

If there are two or more USB terminal on a single PC, try connecting the USB connection cable 
to another USB terminal.

>

Check if your PC is compatible with SDXC memory cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

>

A message prompting to format the card may be displayed when connecting, but do not format.

>

If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB 
connection cable after turning this unit off.

•

Pictures cannot be printed using a printer which does not support PictBridge.

>

Set to [PictBridge(PTP)] in [USB Mode]. 

(P59

, 

226)

>

When using a printer with a Cropping or Borderless Printing function, cancel this function before 
printing. (For details, refer to the operating instructions for the printer.)

>

When you order photo studios to print pictures, ask the photo studio if the pictures can be printed 
with both ends.

•

Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly.

>

Please use a printer that supports panorama pictures. (For details, please see the operating 
instructions of your printer)

>

We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjust 
the size of the still picture to the print paper size.

The card is not recognized by the PC. (The built-in memory is recognized.)

The card is not recognized by the PC. (SDXC memory card is used.)

The picture cannot be printed when the camera is connected to a printer.

The ends of the pictures are cut at printing.

The panorama picture is not printing correctly.

Summary of Contents for Lumix DMC-TS5D






















































































































































































































































































Reviews:

No comments