Panasonic Lumix DMC-TS5D Owner'S Manual Download Page 130

Page: 130 / 277

- 130 -

GPS/Sensor

∫

Using a card reader/writer (commercially available)

Preparation:
Close all other running applications.
Insert the card into the unit.

Select [Assist Data] on the [GPS/Sensor] menu, and then press [MENU/

SET].

Press

to select [Update], and then press [MENU/SET].

Press

to select [SD card], and then press [MENU/SET].

•

The “GPS Assist Tool” is copied to the card.

Turn this unit off and remove the card.

Insert the card into the card reader/writer (commercially available) that is

connected to the PC.

Launch the “GPS Assist Tool” with the PC.

For Windows:
Double-click [GPSASIST.EXE] stored in the [AD_LUMIX] folder of the card.
For Mac:

Double-click [GPSASIST.DMG] stored in the [AD_LUMIX] folder of the card.

Double-click [GPSASIST].

Click [Update] on the screen of the PC.

•

Proceed with the steps according to messages appearing on the PC.
When the update is complete, click [Exit].

•

Do not disconnect the unit from the PC until the data has been updated.

Remove the card.

Insert the card into this unit and turn the unit on.

•

The GPS assist data of this unit is updated.

Summary of Contents for Lumix DMC-TS5D






















































































































































































































































































Search results

Summary of Contents for Lumix DMC-TS5D

Reviews:

Panasonic Lumix DMC-TS5D, Owner'S Manual, Page: 130 / 277

Search results

Summary of Contents for Lumix DMC-TS5D

Reviews: