Panasonic Lumix DMC-LX1 Operating Instructions Manual Download

Page: 13 / 136

Preparation

VQT0S19

Charging the Battery with the Charger

When the camera is shipped, the battery is
not charged. Charge the battery before
use.

Attach the battery with attention
to the direction of the battery.

Connect the charger to the
electrical outlet.

• When the [CHARGE] indicator

lights

in green, charging starts.

• When the [CHARGE] indicator

turns

off (in about 130 minutes), charging is
completed.

Detach the battery.

• After charging is completed, be sure to

disconnect the charger from the electrical
outlet.

• The battery becomes warm after use/

charge or during charge. The camera also
becomes warm during use. However, this
is not a malfunction with the camera.

• The battery will discharge if left for a long

time after charging. Recharge it.

• Use the dedicated charger and battery.
• Charge the battery with the charger

indoors.

• Do not disassemble or modify the

charger.

Summary of Contents for Lumix DMC-LX1









































































































































Search results

Summary of Contents for Lumix DMC-LX1

Reviews:

Related manuals for Lumix DMC-LX1

Brands by name

Popular brands

Panasonic Lumix DMC-LX1, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LX1

Reviews:

Related manuals for Lumix DMC-LX1

Brands by name

Popular brands