Panasonic Lumix DMC-LX1, Operating Instructions Manual

Page: 104 / 136

Playback (advanced)
104
VQT0S19
Playing Back Pictures with a TV Screen
n
Playing back pictures with the
supplied cable
• Turn the camera and the TV off.
• Set the [TV ASPECT]. (P26)
1
Connect the AV cable
A
(supplied) to the [AV OUT] socket
of the camera.
• Connect the AV cable with the [
f
]
mark facing the [
w
] mark on the [AV OUT]
socket.
• Hold
B
and then insert or pull the AV
cable straight.
2
Connect the AV cable to the video
input and the audio input sockets
of the TV.
•
1
Yellow: to the video input socket
•
2
White: to the audio input socket
3
Turn the TV on and select external
input.
4
Turn the camera on and then set
the mode dial to playback mode
[
Q
].
• You can display pictures on a TV only
when the mode dial is set to playback
mode [
Q
].
n
Viewing pictures in other countries
When setting [VIDEO OUT] on the menu,
you can view pictures on a TV in other
countries (regions) which use the NTSC or
PAL system.
• Even if you set menu selection for [VIDEO
OUT] to [PAL], the output signal is still
NTSC in the recording mode.
n
Playback pictures on TV with SD
Memory Card slot
You can put your SD Memory Card in a
television with an SD Memory Card slot to
show still images. (Depending on the
television, some pictures may not take up
the whole screen).
• You cannot play motion pictures. Use the
included AV cable when playing motion
pictures. (See left)
• You may be unable to play MultiMedia
Cards, even if the television has an SD
Memory Card slot.
• Do not use any other AV cables except
the supplied one.
• Read the TV operating instructions too.
• Audio playback is in monaural.
• Pictures might be slightly blurred if you
show them vertically on a television
(connected with the included AV cable).
A
B
1 2