8
3.4.2.
INITIAL SETTINGS:
When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Proceed the picture back up from the unit. (Refer to above "CAUTION 2")
•
Preparation. Set the Recording mode to "Normal Picture Mode".
Set the Recording/playback switch to “[ Recording mode ] (camera mark
(UP))”.
Turn on the power and then press the [MODE] button.
Select the “NORMAL PICTURE MODE" using “[ UP ]
/ [ DOWN ]
of Cursor button”.
Press [ MENU/SET ] button, then turn the power off.
•
Step 1. The temporary cancellation of initial setting:
Set the Recording/playback switch to “[ Recording mode ] (camera mark
(UP))”.
While keep pressing [ E.ZOOM ], [ MENU ] and “[ UP ]
of Cursor button” simultaneously, turn the Power on.
•
Step 2. The cancellation of initial setting:
Set the Recording/playback switch to “[ Playback (Down) ]”.
Press [ E.ZOOM ], [ MENU ] and “[ UP ]
of Cursor button” simultaneously, then turn the Power off.
•
Step 3. Turn the Power on:
Set the Recording/playback switch to “[ Recording mode ] (camera mark
(UP))”, and then turn the Power on.
•
Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU ] and “[ RIGHT ]
of Cursor button” simultaneously, turn the Power off.
Summary of Contents for Lumix DMC-LS80E
