64
Wi-Fi
VQT4M51 (ENG)
Search for available wireless access points.
•
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
•
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the
wireless access point you are using.
1
Press
3
/
4
to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Touching [DISP.] will search for a wireless access point again.
•
If no wireless access point is found, refer to
“
When connecting
with [Manual Input]
”
on P64.
2
(If network authentication is encrypted)
Enter the encryption key.
∫
When connecting with [Manual Input]
1
On the screen displayed in step
1
of “If you are not sure
about the WPS compatibility (connecting by [Manual
Connection])”, select [Manual Input] by pressing
3
/
4
, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select
[Set].
3
Press
3
/
4
to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4
Press
3
/
4
to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
If you are not sure about the WPS compatibility (connecting by [Manual
Connection])
Network authentication type
Encryption types that can be set
[WPA2-PSK]/[WPA-PSK]
[TKIP]/[AES]
[Common Key]
[WEP]
[Open]
[No Encryption]/[WEP]
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 64 ページ ２０１２年１０月２５日 木曜日 午後５時２５分
