Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 51 / 218

- 51 -

Basic

You can set to your preferred blurriness.

Touch [

] to display the setting screen.

Touch the slide bar to set.

Recording of pictures or motion pictures.

• It is also possible to record a picture by touching [

• Defocus Control is cancelled by touching [

Note

• Blurriness may change during motion picture recording depending on the recording conditions.

• Aperture is controlled within the range of appropriate exposure during the recording of a motion

picture, so the aperture may not actually change even when the slide bar is moved depending

on the brightness of the subject, and the blurriness may not change. (For example, blurriness

may not change for dark scenes, such as indoors, since the aperture is fixed to fully open.)

• Depending on the lens used, you may hear a sound from the lens when the Defocus Control is

used, but this is due to operation of the aperture of the lens and it is not a malfunction.

• Depending on the lens used, operational sound of the Defocus Control may be recorded during

the recording of a motion picture when the function is used.

• Depending on the lens used, use of the Defocus Control function may not be possible.

∫

[REC] Mode menu

[ASPECT RATIO]

/[PICTURE SIZE]

/[QUALITY]

/[FACE RECOG.]

[FOCUS MODE]

/[PICTURE ADJUST]

(P137)

/[STABILIZER]

(P76)

1 [PICTURE ADJUST] can be set only [COLOR] and [B/W].

2 It cannot be set to [MODE3]. It will be fixed to [MODE1] when recording a motion picture

even if it is set to [MODE2].

∫

[MOTION PICTURE] Mode menu

[REC MODE]

/[REC QUALITY]

/[FOCUS MODE]

[CONTINUOUS AF]

/[WIND CUT]

3 [WVGA] for [MOTION JPEG] cannot be set.

∫

[CUSTOM] menu

[HISTOGRAM]

(P68)

/[GUIDE LINE]

(P67)

/[REMAINING DISP.]

(P145)

[DEFOCUS CTRL]

(P146)

∫

[SETUP] menu

[CLOCK SET]

/[WORLD TIME]

/[BEEP]

/[LCD MODE]

[LANGUAGE]

• [

] or [

] can be selected for the length of the self-timer.

(P83)

4 It will be reset to [

] when the Intelligent Auto Mode is cancelled or when the power is

switched [ON]/[OFF].

Defocus control function

Settings in Intelligent Auto Mode

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands