- 131 -
Recording
Set the compression rate at which the pictures are to be stored.
Applicable modes:
¢
1 If you delete a RAW file from the camera, the corresponding JPEG image will also be
deleted.
¢
2 It is fixed to maximum recordable pixels ([L]) for each image aspect ratio.
Note
• Refer to
for information about the number of recordable pictures.
• You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a
file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them
using the software “SILKYPIX Developer Studio” by Ichikawa Soft Laboratory on the CD-ROM
(supplied).
• The following effects are not reflected in RAW images:
– [RED-EYE REMOVAL], [I.RESOLUTION], [I.DYNAMIC], [PICTURE ADJUST] and
[COLOR SPACE] in [REC] Mode Menu
– Scene Mode
– My Colour Mode
• [
] images are recorded with a smaller data volume than [
] or [
].
• [PRINT SET] and [FAVORITE] cannot be set to a picture taken by [
].
[OFF]/[ON]/[MEMORY]/[SET]
Note
for details.
[QUALITY]
[
A
]
:
Fine (when giving priority to the picture quality)
[
›
]
:
Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)
[
]
: RAW
i
Fine
(In addition to the [RAW] settings, a fine-equivalent JPEG image is
simultaneously created.)
¢
1
[
]
: RAW
i
Standard
(In addition to the [RAW] settings, a standard-equivalent JPEG
image is simultaneously created.)
¢
1
[
]
:
RAW file (When the image is to be edited with a PC in high quality)
¢
2
[FACE RECOG.]
