Recording
- 76 -
[REC] Mode:
Optical Image Stabilizer
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
∫
Setting the Stabilizer in the [REC] Mode menu
1
Select [STABILIZER] in the [REC] Mode menu.
2
Press
3
/
4
to select the setting and then press [MENU/SET].
• When recording a motion picture, [STABILIZER] will be fixed to [MODE1] even if it is set to
[MODE2] or [MODE3].
• [STABILIZER] cannot be selected when a lens without Stabilizer function is used.
A lens which supports the stabilizer function is required.
– The interchangeable lens (H-H014) does not supports the stabilizer function.
– The interchangeable lens (H-FS014042) support the stabilizer function.
[OFF]
:
[STABILIZER] does not work.
(This can be selected only when using a lens without the [O.I.S.]
switch.)
[MODE1]
:
Jitter is always compensated during [REC] Mode.
[MODE2]
:
The jitter is compensated for when the shutter button is pressed.
[MODE3]
:
Camera shake is corrected for up/down movements. This mode is ideal
for panning (a method of taking pictures which involves turning the
camera to track the movements of a subject which continues to move in
a fixed direction).
