Recording
- 80 -
∫
Changing the settings for [
/
SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
1
Select [AUTO BRACKET] in the [REC] Mode menu.
2
Press
3
/
4
to select [
/
SETTINGS], [STEP] or
[SEQUENCE] and then press [MENU/SET].
3
Press
3
/
4
to select the setting and then press [MENU/SET].
• You can take one picture at a time when set to [
].
• You can continuously take pictures up to set numbers when set to [
].
• Exit the menu after it is set.
Note
• When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
• The exposure may be compensated incorrectly, depending on the brightness of the subject.
• When taking pictures continuously using Auto Bracket with [I.RESOLUTION] set to
[EXTENDED], it may take time to record all the set number of pictures.
• Auto Bracket setting is fixed to [
], [3•2/3] and [0/
`
/
_
] in the Intelligent Auto Mode.
• When the flash is activated, you can take only 1 picture.
• Auto Bracket is disabled when White Balance Bracket is set.
• The Auto Bracket will be disabled during recording of the motion pictures.
Item
Settings
Item
Settings
[
/
SETTINGS]
[
] (single)
[SEQUENCE]
[0/
`
/
_
]
[
] (burst)
[
`
/0/
_
]
[STEP]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)