41
VQT2S81
Basic
Note
• Due to conditions such as the ones below, a different scene may be identified for the same subject.
– Subject conditions: When the face is bright or dark, The size of the subject, The colour of the
subject, The distance to the subject, The contrast of the subject, When the subject is moving
– Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken, When zoom is used
• To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate recording mode.
• The Backlight Compensation
– Backlight refers to when light comes from the back of a subject. In this case, the subject will
become dark, so this function compensates the backlight by brightening the whole of the
picture automatically. Backlight compensation is automatically applied in Intelligent Auto Mode.
It is possible to set the focus and exposure to the specified subject. Focus and exposure
will keep following the subject automatically even if it moves.
1
Press
2
.
• [
] is displayed in the lower left of the screen.
• AF Tracking frame is displayed in the centre of the
screen.
• Press
2
again to cancel.
2
Place the subject in the Tracking frame, and
press the shutter button halfway to lock the subject.
• AF area will turn green when the camera detects the subject.
• AF tracking frame will turn yellow when you release the shutter button and
the optimum scene for the locked subject will be identified.
• Press
2
to cancel.
Note
• [FACE RECOG.] does not work during AF tracking.
• Please read the Note regarding the AF tracking on P71.
• Only the following functions can be set in this mode.
[REC] mode menu
– [ASPECT RATIO] (P114)/[PICTURE SIZE] (P115)/[QUALITY] (P116)/[FACE RECOG.]
(P116)/
[STABILIZER]
¢
1
(P117)
¢
1 It cannot be set to [MODE3].
[MOTION PICTURE] mode menu
– [REC QUALITY]
¢
2
(P103)/[CONTINUOUS AF] (P124)/
[WIND CUT] (P124)
¢
2 [
] cannot be set.
[CUSTOM] menu
– [GUIDE LINE] (P125)
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LCD MODE]/[LANGUAGE]
• Use the Quick Menu (P30) to set the following functions:
– [STANDARD] and [STANDARD] (
) in [FILM MODE] (P82)
– [
] and [
] in [SELF-TIMER]
¢
3
(P68)
¢
3 It will be reset to [
] when the Intelligent Auto Mode is cancelled or when the power is
switched [ON]/[OFF].
AF Tracking Function
Settings in Intelligent Auto Mode
DMC-G10K&G10WGN-VQT2S81_eng.book 41 ページ ２０１０年４月２３日 金曜日 午後８時２５分
