85
VQT2S74
Advanced (Recording pictures)
[REC] mode:
±´
Taking pictures by specifying the aperture/
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [
].
Rotate the rear dial to set the aperture
value.
•
It will switch between aperture setting operation and
Exposure Compensation operation every time the
rear dial is pressed.
•
Rotate the rear dial to display the [EXPO.METER].
(P128)
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the mode dial to [
].
Rotate the rear dial to set the shutter
speed.
•
It will switch between shutter speed setting operation
and Exposure Compensation operation every time
the rear dial is pressed.
•
Rotate the rear dial to display the [EXPO.METER].
(P128)
Take a picture.
Note
•
The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the
pictures on the playback screen.
•
Set the aperture value to a higher number when the subject is too bright in Aperture-Priority AE
Mode. Set the aperture value to a lower number when the subject is too dim.
•
When you use a lens with an aperture ring, the setting for the rear dial becomes effective if you
rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you
rotate the aperture ring to a position other than [A] in Aperture-Priority AE Mode.
•
The aperture value and the shutter speed displayed on the screen turn red and blink when the
exposure is not adequate.
[
] Aperture-priority AE
[
] Shutter-priority AE
DMC-G10KEB-VQT2S74_eng.book 85 ページ ２０１０年４月２３日 金曜日 午後８時３４分