Panasonic LUMIX DMC-FZ7 Operating Instructions Manual Download

Page: 45 / 132

Advanced

VQT0V63

– [STARRY SKY] (P63):

15 seconds, 30 seconds, 60 seconds

∫

Adjusting flash output

Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.

Press

(

) several times until

[FLASH] appears and then press

to set the flash output.

• Select [0] to return to the original flash

output.

Press [MENU/SET] to finish.

• You can adjust from [

2 EV] to [

2 EV]

in steps of [1/3 EV].

• When the flash output is adjusted, the

flash output value appears on the upper
left of the screen.

• The flash output setting is memorized

even if the camera is turned off.

• In motion picture mode [

], simple

mode [

] and [SCENERY] (P60),

[NIGHT SCENERY] (P61),
[FIREWORKS] (P63) or [STARRY SKY]
(P63) in scene mode, you cannot adjust
the flash output.

• Do not look directly at the flash at

close range when it is activated.

• Do not bring the flash too close to

objects or close the flash while it is
activated. The objects may be
discolored by its heat or lighting.

• Do not cover the photo flash with your

fingers or other objects.

• If you press the shutter button halfway

when the flash is activated, the flash icon
turns red.

• When the jitter alert appears, we

recommend using a tripod.

• When you take a picture beyond the

available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.

• When the flash is being charged, the flash

icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.

• When taking a picture with the flash, the

white balance is automatically adjusted
[except for [

] (Daylight), [

] (Flash)].

However, the white balance may not be
properly adjusted if the flash level is
insufficient. (P75)

• When the shutter speed is fast, the flash

effect may not be sufficient.

• If you repeat taking a picture, it may not

actually be taken even if the flash is
activated. Take a picture after the access
indication disappears.

• When taking a picture with the flash,

we recommend removing the lens
hood. In some cases it may not allow
the scene to be illuminated properly.

• Do not close the flash soon after the flash

is activated prior to taking pictures due to
AUTO/Red-eye reduction etc. It causes a
malfunction.

• The red-eye reduction effect differs

between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.

• When using a conversion lens, the built-in

flash setting is fixed to Forced OFF [

• When you set burst mode or auto bracket,

only 1 picture is recorded for every flash
activated.

FLASH

SELECT

EXIT

MENU

Downloaded From camera-usermanual.com Panasonic Manuals

Summary of Contents for LUMIX DMC-FZ7





































































































































Search results

Summary of Contents for LUMIX DMC-FZ7

Reviews:

Related manuals for LUMIX DMC-FZ7

Brands by name

Popular brands

Panasonic LUMIX DMC-FZ7, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FZ7

Reviews:

Related manuals for LUMIX DMC-FZ7

Brands by name

Popular brands