Preparation
17
VQT0V63
∫
Strap (supplied)
1
Pass the strap through the hole at
the strap eyelet.
2
Pass the strap through the
stopper and fasten the strap.
A
: Pull the strap 2 cm or more.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Check that the strap is firmly attached to
the camera.
• Attach the strap so that you can see the
“L
UMIX
” logo.
Attaching the Lens
Hood
In bright sunlight or backlight, the lens hood
will minimize lens flare and ghosting. The
lens hood cuts off excess lighting and
improves the picture quality.
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1
Attach the hood adaptor
(supplied).
• Do not tighten the hood adaptor too
much.
2
Place the camera upside down,
align the mark on the lens hood
with the mark
A
on the camera
and then insert the lens hood.
3
Tighten the screw.
• Check if the screw is loose and then
attach the lens hood.
• Do not tighten the screw too much.
Downloaded From camera-usermanual.com Panasonic Manuals