Panasonic LUMIX DMC-FZ30EB Operating Instructions Manual Download

Page: 103 / 140

Playback (advanced)

103

VQT0S00

[PLAY] mode menu (Refer to P101 for how to select the menu.)

You can add a mark [

] (favourites icon) to

your favourites images. After you set
images as favourites, you can then delete
the images not set as favourites ([ALL
DELETE EXCEPT

]) (P62) and play back

the images set as favourites only as a Slide
Show (P102). Before going to a photo
studio for digital printing, using [ALL
DELETE EXCEPT

] is convenient so only

the pictures you want the photo studio to
print remain on the card.

Select [ON] to set it.

• You cannot set favourites if [FAVORITE]

is set to [OFF]. Also [

] favourites icon

will not appear when [FAVORITE] is set
to [OFF] even if [FAVORITE] was
previously set to [ON].

Select the picture and set it.

• Repeat the above procedure.
• If

is pressed while the [

] favourites

icon

is displayed, [

] is cleared, and

the favourites setting is cancelled.

• You can set up to 999 images as

favourites.

• Using [LUMIX Simple Viewer] or

[PHOTOfunSTUDIO-viewer-] (for
Windows

) on the CD-ROM (supplied),

favourites can be set, confirmed or
deleted. (For details please refer to the
separate operating instructions for PC
connection.)

• Images taken with different equipment

may not be able to be set as favourites.

Setting Favourites

[FAVORITE]

PLAY

DPOF PRINT

SLIDE SHOW

ROTATE

ROTATE DISP.

FAVORITE

OFF

EXIT

MENU

SELECT

SET

100_0001

1 / 5

10:00

1.DEC.2005

Summary of Contents for LUMIX DMC-FZ30EB













































































































































Search results

Summary of Contents for LUMIX DMC-FZ30EB

Reviews:

Related manuals for LUMIX DMC-FZ30EB

Brands by name

Popular brands

Panasonic LUMIX DMC-FZ30EB, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FZ30EB

Reviews:

Related manuals for LUMIX DMC-FZ30EB

Brands by name

Popular brands