manualshive.com logo in svg

Panasonic LUMIX DMC-FZ2EN, Operating Instructions Manual

Share
Download
Panasonic LUMIX DMC-FZ2EN Operating Instructions Manual Download Page 63

Recording images (advanced)

63

Using the MC Protector/ND Filter

The MC protector (DMW-LMC55; optional) 
neither affects the colors nor the amount of 
light, so it can always be left attached to 
protect the Digital Camera’s lens.
The ND filter (DMW-LND55; optional) 
reduces the amount of light to approximately 
1/8th without affecting the color balance.

[Preparation]
• Check that the power switch is set to [OFF] 

and the lens barrel is stored.

• Close the flash. (P37)

1

Remove the lens ring.

2

Attach the lens hood adaptor 

1

.

3

Install the MC protector 

2

 or the ND 

filter 

3

.

• The lens hood 

4

 and lens cap 

5

 can be 

attached when installing the MC protector or 
ND filter.

• When taking pictures with the flash using 

the MC protector/ND filter, the vignetting 
effect may occur.

• Do not use the conversion lens.

If it is used with the supplied lens hood 
adaptor, it may break.

3

2

1

FZ2-EN_ENG.book  63 ページ  ２００３年８月７日　木曜日　午後３時４１分

Summary of Contents for LUMIX DMC-FZ2EN









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands