manualshive.com logo in svg

Panasonic Lumix DMC-FZ18E, Service Manual

Share
Download
Panasonic Lumix DMC-FZ18E Service Manual Download Page 44

S5. Replacement Parts List

S-9

Others are supplied from “Panasonic Shikoku Electronics Co., Ltd." (PSEC-SAIJO).

PAVC COMPANY CS Group (PAVC-CSG). 

2. 

Parts marked with [PAVC-CSG] in the remarks column are supplied from 

    “Matsushita Battery Industrial Co., Ltd.”

1. 

Parts marked with [MBI] in the remarks column are supplied from 

Definition of Parts supplier:

E.S.D. standards for Electrostatically Sensitive Devices, refer to “PREVENTION OF 

ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES”

section.

of this assembly in production, it will no longer be available.

All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.

Components identified with the mark      have the special characteristics for safety. 

When replacing any of these components, use only the same type.

2. IMPORTANT SAFETY NOTICE

3. Unless otherwise specified,

4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation 

1.* Be sure to make your orders of replacement parts according to this list.

Note:

Summary of Contents for Lumix DMC-FZ18E




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands