8.
Functions Customized for Various Subjects and Purposes
194
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative
(P159)
referring to the histogram
(P66)
and then taking the picture. It may result in a
better quality picture.
•
Displayed zebra patterns will not be recorded.
•
If you assign [Zebra Pattern] to [Fn Button Set]
(P44)
in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1]
→
[Zebra 2]
→
[OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1]
→
[OFF], allowing
you to switch the setting quickly.
Applicable modes:
You can display the recording screen in black and white. This function is convenient when
a black and white screen will make it easier to set focus with Manual Focus.
Settings: [ON]/[OFF]
•
Recorded images will not be affected.
Recording while monitoring camera images
When using the HDMI output, you can take pictures while
monitoring the camera image on a TV, etc.
Refer to
P301
on how to connect with TV by using HDMI
micro cable.
•
The camera image is not output to the TV during motion picture
recording.
∫
Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
(P53)
in [TV Connection] on the [Setup] menu.
•
When using the Auto Focus Mode [
] or MF assist, the screen cannot be enlarged in
windowed mode.
•
[Aspect Ratio] in the [Rec] menu is fixed to [16:9].
•
Electronic sounds and electronic shutter sounds are muted.
•
If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
•
The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
Displaying the recording screen in black and white ([Monochrome Live View])
>
[Custom]
>
[Monochrome Live View]
[ON]:
The camera display is output as is.
[OFF]:
Only images are output.
MENU
