Playback (advanced)
81
VQT0R47
[PLAY] mode menu (Refer to P71 for how to select the menu.)
4
Select [YES] or [NO] and set it.
• When you select [YES], the picture is
overwritten.
When trimmed pictures are overwritten,
they cannot be restored.
• When the original picture is protected,
you cannot overwrite the trimmed
picture.
When you select [NO], a trimmed
picture is newly created.
• The picture size of the trimmed pictures
may become smaller than that of the
original one depending on the cut size.
• The picture quality of the trimmed picture
will be deteriorated.
[CLEAN UP] recovers the data writing
speed, which has been reduced, of the SD
memory card.
In general, the data writing speed of the SD
memory card reduces when recording and
deletion are repeated. In this case,
recording may stop in the middle while you
are recording motion images. We
recommend you to clean up the card using
the camera before recording motion images.
1
Select [YES] to start the clean-up.
• [CLEAN UP] is a function to recover the
speed of writing into a free space in the
card. Therefore, pictures and data already
recorded in the card will not be erased.
• When you start clean-up, it may take time
to complete.
• Depending on the type of card,
[CLEAN UP] may not be effective.
• [CLEAN UP] does not support
MultiMediaCard.
• During clean-up do not turn the camera off.
• When you clean up the card, use a battery
with sufficient battery power (P13) or AC
adaptor (DMW-AC5; optional).
• When the SD Memory Card Write-Protect
switch is slid to [LOCK], you cannot clean
up the card.
CANCEL
MENU
DELETE ORIGINAL
PICTURE?
SELECT
SET
TRIMMING
YES
NO
MENU
2 times
Clean-up
[CLEAN UP]
CLEAN UP
CLEAN UP THE CARD?
SELECT
SET
YES
NO
VQT0R47ENG.book 81 ページ ２００５年５月２６日 木曜日 午後１時３８分
