- 51 -
Basic
• Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• It may take longer to format the built-in memory than the card.
• If you cannot format, contact the dealer or your nearest Service Centre.
• If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
• The Stabiliser function is switched between [On] and [Off] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
• [Stabilizer Demo.] is an approximation.
• [Auto Demo] is not output to the television.
[Format]
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted).
Formatting irretrievably deletes all
the data so check the data carefully before formatting.
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows. ([Auto Demo])
[Stabilizer Demo.]
A
Amount of jitter
B
Amount of jitter after correction
[Auto Demo]:
[On]
[Off]
A
B
