Preparation
- 28 -
•
Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode.
•
[SLEEP MODE] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the
Optical Zoom range.
•
The effect of the [LCD POWER SAVE] will not affect the image being recorded.
•
Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the
brightness of the LCD monitor.
•
The Auto Review function is activated regardless of its setting when using Auto Bracket
(P65)
,
[SELF PORTRAIT]
(P73)
, [HI-SPEED BURST]
(P79)
, [FLASH BURST]
(P80)
and
[PHOTO FRAME]
(P83)
in Scene Mode, Burst Mode
(P67)
and when recording still pictures
with audio
(P118)
. Also, you cannot set the Auto Review function.
•
In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
•
[AUTO REVIEW] does not work when recording motion pictures.
q
[ECONOMY]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
p
[SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢
.
¢
Excluding the Digital Zoom range.
[OFF]/[ON]
o
[AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until one of the buttons is
pressed.
ECO
