Preparation
- 28 -
•
When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
•
This will work when the AV cable is connected.
•
This will work when the AV cable is connected.
x
[USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y
[SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{
[PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z
[PC]:
Set after or before connecting to a PC.
|
[VIDEO OUT]
Set to match the colour television system in each country.
(Playback mode only)
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
[TV ASPECT]
Set to match the type of TV.
(Playback mode only)
[
W
]:
When connecting to a 16:9 screen TV.
[
X
]:
When connecting to a 4:3 screen TV.
}
[SCENE MENU]
Set the screen that will appear when a scene mode has been
selected.
[OFF]:
The recording screen in the currently selected scene
mode appears.
[AUTO]:
The [SCENE MODE] menu screen appears.
[VERSION DISP.]
It is possible to check which version of
firmware is on the camera.
