15
VQT1P28
Preparation
Note
• Do not turn this unit off, remove its battery or card or disconnect the AC adaptor
(DMW-AC5G; optional) when the access indication is lit [when pictures are being read or
deleted or the built-in memory or the card is being formatted (P23)]. Furthermore, do not
subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
•
The data on the built-in memory or the card may be damaged or lost due to electromagnetic
waves, static electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
•
Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation. (P23)
•
Keep the Memory Card out of reach of children to prevent swallowing.
Setting Date/Time (Clock Set)
We recommend selecting [LANGUAGE] (P23) from the [SETUP] menu (P19) before
setting date/time.
• The clock is not set when the camera is shipped.
Press [MENU/SET].
Press
2
/
1
to select the items (year, month,
day, hour, minute or display sequence), and
press
3
/
4
to set.
A
: Time at the home area
B
: Time at the travel destination (P55)
‚
: Cancel without setting the clock.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off.
Then turn the camera back on, switch to recording mode, and check that the display
reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting (In normal
picture mode)” procedure below.
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A
[MENU/SET] button
B
Cursor buttons
1
ON
OFF
A
B
/SET
MENU
2
:
:
3
4
DMC-FX35GN_mst.book 15 ページ ２００８年１月２８日 月曜日 午後４時４５分
