11
(ENG) VQT2B46
Inserting/Removing the Battery/Card
(Optional)
• Check that the camera is turned off.
• We recommend using a Panasonic card.
1
Slide the release lever in the direction of
the arrow and open the card/battery door.
• Always use genuine Panasonic batteries (DMW-
BCF10PP).
• If you use other batteries, we cannot guarantee
the quality of this product.
2
Battery: Insert it fully being careful about
the direction for insert. Pull the lever
A
in the direction of the arrow to remove
the battery. Card: Push it fully until it
clicks being careful about the direction
for insert. To remove the card, push the
card until it clicks, then pull the card out
upright.
B
Do not touch the connection terminals of the
card.
• The card may be damaged if it is not fully
inserted.
3
1
: Close the card/battery door.
2
: Slide the release lever in the direction
of the arrow.
• If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
VQT2B46̲DMC-FS4̲PC̲EN.indd 11
VQT2B46̲DMC-FS4̲PC̲EN.indd 11
2009/02/17 12:51:01
2009/02/17 12:51:01
