242
Wi-Fi/Bluetooth
Controlling with a Smartphone
■
Turning off the camera with the smartphone
Select [ ]
Select [ OFF]
●
When [Remote Wakeup] is set to [ON], the Bluetooth function continues to operate even after the
camera is turned off, thus causing the battery to drain.
Operating the shutter button of the camera using a
smartphone (remote recording)
Wireless connectivity required:
Wi-Fi
1
Connect to a smartphone
2
Operate the smartphone
If the camera is already connected to the smartphone via Bluetooth, select [
] → [
Remote
operation].
(iOS devices) Depending on the connection status of the smartphone, you may need to change the
connected device on the Wi-Fi setup screen. Follow the on-screen message on the smartphone to
change the setting.
Select [ ]
Take pictures
•The recorded images are saved in the camera.
•Some settings are not available.
■
Setting the higher priority between the camera and smartphone to perform
operations
→
[Setup
] → [
Wi-Fi
] → [
Wi-Fi Setup
] → [
Priority of Remote Device]
[Camera]
Allows you to perform operations with both the camera and the smartphone.
•The camera’s dial settings, etc. cannot be changed with the smartphone.
[Smartphone]
Allows you to perform operations only with the smartphone during remote
recording.
•The camera’s dial can also be operated with the smartphone.
•To end remote recording, press any of the buttons on the camera to turn
on the screen, and select [Cancel].
•The setting of this function cannot be changed while the connection is active.
