Panasonic Lumix DC-TZ96D, Operating Instructions For Advanced Features

Page: 292 / 305

292
Others
Q&A Troubleshooting
■
Monitor/viewfinder
The monitor/viewfinder is turned off although the camera is turned on.
•If no operations are performed during the set time period [Auto LVF/Monitor Off] (→ 203) is
activated, and the monitor/viewfinder turns off.
•When a hand or an object is close to the eye sensor, the monitor display mode could be switched
to viewfinder display mode. (→ 33)
It may flicker for an instant or the brightness of the screen may change significantly for an
instant.
•This occurs due to the aperture of the lens changing when the shutter button is pressed halfway, or
when the brightness of the subject changes. This is not a malfunction.
Cannot switch between the monitor and viewfinder when pressing [LVF] button.
•When you open the monitor, the display automatically switches to monitor display, and the [LVF]
button and eye sensor are disabled.
•When it is connected to a computer or printer, the camera can display pictures on the monitor only.
■
Playback
Cannot view pictures. There are no recorded pictures.
•A card is not inserted in the camera.
•Has the file name of the picture been changed on a computer? If so, it cannot be played back on
the camera.
→ It is recommended to use the “PHOTOfunSTUDIO” software (→ 271) to write pictures from PC
to card.
•Set [Playback Mode] to [Normal Play]. (→ 213)
Red areas in pictures appear blackened.
•When the digital red-eye correction ([ ], [ ], [ ]) is operating, red areas may be
blackened.
→ We recommend setting the flash mode to [ ]/[ ] or [Red-Eye Removal] to [OFF] before
recording. (→ 179)