272
Connecting with other devices
Storing recorded still pictures and motion pictures in
the recorder
You can connect the camera to a Panasonic Blu-ray recorder or DVD recorder and store
pictures from the camera on the recorder.
Preparations
•Turn on the camera and recorder.
1
Connect camera to recorder
•Check the plug direction and insert it straight in. (If the cable is inserted in the
wrong direction, the plug could become deformed and cause faulty operation.)
Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
•Do not use any other USB connection cables except the supplied one.
[USB/CHARGE] socket
USB connection cable (supplied)
2
Use to select [PC(Storage)] and press [MENU/SET]
•If you set the [USB Mode] to [PC(Storage)] in the [Setup] menu in advance, the
camera will be automatically connected to the recorder without displaying the
[USB Mode] selection screen.
3
Dub by operating the recorder
•For details on dubbing and playback procedures, refer to the operating
instructions for the recorder.
•Some recorders may not support certain modes, such as the 4K motion picture
mode.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
When the battery begins to run out during communication, a warning beep sounds. In this case,
stop the transfer immediately. Otherwise, the data may be damaged.
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable.
