Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 85 / 240

85
3-4-2 Operation procedure with external control
⿎
Operation example when controlling the laser marker from external control devices such as
PLC
Control by using I/O or
communication commands
Refer to “3-4-4 Remote mode settings” (P.89).
The device is ready for receiving the marking starting signal (trigger).
Turn ON key switch of laser marker controller
Marking
Control by communication
commands
I/O control
OPEN shutter
Remote mode ON
Select file
Confirm READY OUT is ON.
Trigger Input ON
Laser pumping ON
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• It is available to the external control combining I/O, and communication commands.
• You need to configure the system settings on the I/O communication in advance before using external control. Refer to
“3-4-3 General settings before external control” (P.86).
• For details on the operation procedure when you link an image checker or a code reader, refer to “6 Link Control with
External Devices” (P.147).
ME-LPRH-SM-3