background image

User's Manual

Lithium-ion Storage Battery System

Model No.

 LJ-SK84A

Network Adaptor

Model No.

 LJ-NA02

-  Thank you for purchasing a Panasonic product.  

Please read this User's Manual thoroughly before operating the system.  
For future reference, please keep this manual in a safe place.

-  For disposal, please contact your Household Hazardous waste depot.

Table of Contents

Safety Precautions ............................................... 2
1.  How the System Works ................................. 4
2.  System Overview ........................................... 8
3.  Control Panel ................................................. 9
4.  Start and Stop Operation ............................. 10
5.  Switching between Grid Operations and  

Back-up Operations ......................................11

6.  Display Modes ............................................. 12
7.  Date/Time Display and Setting .................... 13
8.  User Setting ................................................. 15
9.  Settings Overview ........................................ 20
10.  Inspection and Maintenance ........................ 22
11. Troubleshooting ........................................... 26

12.  Specifications

............................................... 28

13. Warranty  ..................................................... 30

Summary of Contents for LJ-NA02

































Reviews: