![background image](http://html1.mh-extra.com/html/panasonic/lc4h-ps-r6-ac240v/lc4h-ps-r6-ac240v_manual_3476677002.webp)
LC2H
2) Installation frame type
1
Standard type
Note) Please ask us about types without front resetting.
2
Backlight type
2. PC board mounting type
Specifications
No. digits
Counting speed
Front reset
Input method
Part No.
8 digits
2 kHz/30 Hz switchable
Yes
Non-voltage input type
LC2H-F-2KK
Voltage input type (4.5 to 30 V DC)
LC2H-F-DL-2KK
30 Hz
Free voltage input type (24 to 240 V AC/DC)
LC2H-F-FV-30
No. digits
Counting speed
Front reset
Input method
Part No.
8 digits
2 kHz/30 Hz switchable
Yes
Voltage input type (4.5 to 30 V DC)
LC2H-F-DL-2KK-B
No. digits
Counting speed
Front reset
Input method
Part No.
8 digits
2 kHz
No
Non-voltage input type
LC2H-C-2K-N
30 Hz
LC2H-C-30-N
1. Panel mounting type
Notes) 1. The value given for battery life is calculated based on continuous operation (count input signal ON/OFF = 1:1), therefore, this value is not guaranteed.
Also, battery life is decreased 30% when operation is continuous with 2 kHz count inputting in 2 kHz mode.
2. Operation is at 25 Hz when using 24 V AC.
3. Only for installation frame type.
Type
Item
Standard type
Backlight type
Standard type
Non-voltage input
Voltage input
Free voltage type
No. digits
8 digits
External power supply
Not required (built-in battery)
Max. counting speed
2 kHz/30 Hz (Switchable by switch)
30 Hz (Note 2)
Count
input
Min. input signal width
(ON: OFF = 1:1)
0.25 ms/16.7 ms (Switchable by switch)
16.7 ms
Input method (signal)
Non-voltage input using
contacts or open collector
connection
High level: 4.5 to 30 V DC
Low level: 0 to 2 V DC
High level:
24 to 240 V AC/DC
Low level:
0 to 2.4 V AC/DC
Input impedance
When shorted:
Max. 10 k
Ω
When open:
Max. 750 k
Ω
Approx. 4.7 k
Ω
—
Residual voltage
Max. 0.5 V
—
—
Reset
input
Min. input signal width
200 ms
Input method (signal)
Non-voltage input using
contacts or open collector
connection
High level: 4.5 to 30 V DC
Low level: 0 to 2 V DC
Non-voltage input using
contacts or open collector
connection
Input impedance
When shorted:
Max. 10 k
Ω
When open:
Max. 750 k
Ω
Appox. 4.7 k
Ω
When shorted:
Max. 10 k
Ω
When open:
Max. 750 k
Ω
Residual voltage
Max 0.5 V
—
Max. 0.5 V
Display method
7-segment LCD
7-segment LCD
With green/red backlight
7-segment LCD
Breakdown voltage (initial)
Between charged and uncharged parts: 1,000 V AC for 1 minute.
Between charged and
uncharged parts: 2,000 V
AC for 1 minute.
Insulation resistance (initial)
Min. 100 M
Ω
(measured at 500 V DC) Measurement location same as for break down voltage.
Backlight power
—
24 V DC (±10%)
—
Protective construction (Note 3)
IEC Standard IP66 (only panel front: when using rubber gasket)
Accessories (Note 3)
Rubber gasket, mounting bracket
Battery life
7 years (at 25°C
77°F
) Note 1
6 years (at 25°C
77°F
)
All Rights Reserved © C
OPYRIGHT
Matsushita Electric Works, Ltd.