background image

DISCONTINUED MODELS AND RECOMMENDED SUBSTITUTES

MHP-NM-

MHP-M-

MHP-YC-

MHP-YC

MHP-N-

MHP-N

MHP-M

MHP-NS-

MHP-N-

PM48A-

PM4HA-

PM48

PM48

PM4HS-

PM4H-S

CHP-SD-

PM48A

PM4HSD-

PM4H-A

CHP-SD

PM4H-SD

PM4HF-

PM4HS-
PMH-

PM4HS-
PMH-

MHP-YM-

MHP-YM

MHP-NM-

MHP-NM

Discontinued models Recommended substitutes

Attachment

Discontinued models Recommended substitutes

Attachment

Attachment frame 
AT7831 should be used.

The external dimension 
and contact capacity are 
different.

The external dimension 
and contact capacity are 
different.

* External dimensions, 
  however, differ. In 
  addition, the reset method 
  changes from voltage 
  input to non-voltage input.

With exposed attachment, 
terminal base ATC180041 
should be used.
* External dimensions and 
  contact capacity, however, 
  differ. In addition, with the 
  PM4H-SD:
1) (1) to (8) have no internal 
    connection, and
2) the input (star) changes 
    to 1a.

With exposed 
attachment, terminal 
base ATC180041 should 
be used.

With exposed 
attachment, terminal 
base ATC180031 should 
be used.

Attachment frame 
AT7821 should be used.

Terminal base AT8-RFD 
should be used.

Terminal base AT8-RFD 
should be used.

Timers

MHP-NS

MHP-NM

MHP-N

PM4H-F

Exposed type
Square plug-in/
horizontal type

Exposed type
Round plug-in/
vertical type

Exposed type
Round plug-in/
horizontal type

Exposed type
Round plug-in/
vertical type

Embedded type
With attachment 
frame

Exposed type
Without 
attachment frame

Embedded type
With attachment 
frame

Exposed type
Without 
attachment frame

CHP-N-

Exposed type
with attachement
frame type

CHP-N-

CHP-N

Exposed type
without attachment 
frame type

CHP-NF-

CHP-NF Exposed type

without attachment 
frame type

CHP-NF

PM4HF-

CHP-NF

PM4H-F

Attachment frame 
AT7821 should be used.
* External dimensions, 
  however, differ. In 
  addition, the reset method 
  changes from voltage 
  input to non-voltage input.

Exposed type
Round plug-in/
vertical type

PM48M

PM4H-M

PM48M-

PM4HM-

PM48F-

PM48F

PM4HF-

PM4H-F

PM48SD

PM48SD

PM4HSD

PM4H-SD

With exposed 
attachment, terminal 
base ATC180031 for F8 
type and F8R type 
ATC180041 for F11R type.

With exposed 
attachment, terminal 
base ATC180031 should 
be used.

With exposed 
attachment, terminal 
base ATC180031 for F8 
type and F8R type 
ATC180041 for F11R type.

PM4H-S
PMH

CHP-N

PM4H-S
PMH

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

Summary of Contents for LC2H preset



































Reviews: