EN-
20
Brings a pan of water to the boil.
Available on the cooking zone with
.
1. Select the cooking zone required.
2. Touch Autoboil Mode key (
).
The appliance beeps 5 times when the water
reaches boiling point and maintains a rolling boil.
After beeping add ingredients and adjust the
heating power with the slider as required.
Autoboil Mode
IH Cooking
NOTE
■
Cookware with a non-stick coating may affect the sensor detection.
After beeping, adjust the power level as required.
■
Cooking Timer can be used with Autoboil Mode.
(See page 25)
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
■
Use a lid until boiling.
■
Use a minimum of 0.5 L of water. If a larger pan that
covers 3 or more areas of fl ex cooking zone, use a
minimum of 1 L of water.
■
Minimum 1 cm of depth when fl ex cooking zone is
used.
In order to prevent water boiling over from the pan, the
following is recommended.
■
No more than 70% pan capacity should be used.
■
There should be a minimum gap of 3 cm between
the lid and the water surface.
Min. 0.5 L / 1 L
Min. 3 cm
3. Turn off the cooking zone.
(See page 17)
NOTE
Temperature ‘100’ will fl ash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to “7”. Increase or decrease the power level as
required.
