101
107
705
380
Intake vent
(1 place on the undersurface)
Φ
190
Φ
190
181
400
229
742
Exhaust vent
742
380
181
400
229
Intake vent
(1 place on the undersurface)
Φ
190
Φ
150
Exhaust vent
6
18
364
Intake vent
2
3
Safety Precautions
Failure to follow these instructions may cause death or serious injury.
WARNING
•
During installation, follow these instructions strictly.
Improper installation may cause electric leakage or
fi
re.
•
Install a 220 V / 20 A dedicated single-phase circuit with an
earth leakage circuit breaker for the power supply.
The electrical wiring may abnormally overheat if the dedicated circuit is not
properly connected.
•
Electrical work must be performed by a legally quali
fi
ed
electrician.
Improper wire connections may cause electric leakage or
fi
re.
•
This appliance must be properly earthed following the
electric laws. The earth conductor must not be connected to
a gas pipe, water pipe, earth of lightning rod and telephone.
Failure to observe this may cause electric shock in case of appliance
breakdown or insulation breakdown.
•
Have a quali
fi
ed electrician earth the appliance.
Improper earthing may cause electric shock.
•
Before installation, make sure to turn off the circuit breaker
to prevent electric shock.
•
The power cord must be correctly connected to ensure the
integrity of the connection.
Improper wire connections may cause electric leakage or
fi
re.
•
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or a similar quali
fi
ed person
in order to avoid a hazard.
•
Do not disassemble, repair or modify the appliance (e.g. top
plate).
Doing so may cause abnormal operation of the appliance and may result in
danger.
•
Do not climb on the appliance, or drop heavy items on top of it.
Cracks in the top plate may cause overheating, malfunctions or electric shock.
Failure to follow these instructions may cause injury or property damage.
CAUTION
•
Use a heat resistant material for the countertop. However,
do not use a varnished material as they may get discoloured.
The material of the countertop should have heat resistance equal to or higher
than the heat resistance of “laminated thermosetting high-pressure decorative
sheets”. If the materials are not heat resistant, they may get deformed or
cause a
fi
re.
Dimensions
■
Top view
■
Front view
•
KY-A227D
•
KY-E227D/KY-C227D
(unit: mm)
• Power cord length: approx. 1.5 m
■
Side view
