必要
な
と
き
Care
22
23
If any of the following error indications appears, check the cause and deal with it.
After the cause is eliminated, heating resumes automatically.
Indication
Probable cause
Operation keys error
detection
• Water or foreign objects are attached on or around
the operation panel, or water or ingredients have
boiled over.
→
Remove them.
* If the IH heater has been turned off, perform
the key operation again.
• An operation key has been touched for 3 seconds
or more. (Except touch-and-hold operations
requiring 3 seconds or more of continuous touch,
such as rapid change of timer)
(Flashing)
Undetected pot auto shutoff
Small object auto shutoff
• No pot is placed on the IH heater.
• The pot has been removed while heating.
• The pot is not centred on the IH heater.
• An incompatible pot is used. (P.10)
• A metal kitchen tool, such as knife or spoon, is
placed on the top plate.
* If the above conditions are not remedied, the
display and the main power will turn off in
1 minute.
■
If you cannot resolve the above problems,
or any
error appears, contact the service centre.
→
Turn off the main power switch and breaker. Contact the dealer you have
purchased the appliance from or service agent for details concerning the
2-digit number following “ ”.
Note
• For the service centre contact list, refer to the Guarantee Certi
fi
cate.
Speci
fi
cations/IH Cooking Mechanism
Power supply
Single phase 220 V ~ 50 Hz
Power consumption
2,800 W
Standby power
consumption
(approx.)
0.8 W
*When the main power is off
Dimensions
(approx.)
Width 742 × Depth 400 × Height 107 mm
Weight
(approx.)
10.4 k
g
Heat level
adjustment
(approx.)
• Left IH heater:
9-level adjustment (120 W to 2,800 W equivalent)
• Right IH heater:
8-level adjustment (120 W to 1,800 W equivalent)
Congee menu
4 servings or 2 servings
Cooking timer
1 minute to 9 hours 30 minutes
■
Using both the right and left IH heaters simultaneously
If both the right and left IH heaters are used simultaneously, the heating power
of the IH heaters may be regulated as follows in order to restrict overall power
consumption.
• The heat level indication does not change but the heating power weakens.
• The heat level is automatically reduced by one or several levels.
• The heat level cannot be increased.
→
If high heat levels are required, avoid using the right and left IH heaters
simultaneously, or reduce the heat level of either of the IH heaters.
Error Indications
Top plate
Top plate
Eddy current
Eddy current
Magnetic force
Magnetic force
generating coil
generating coil
Magnetic
Magnetic
lines of force
lines of force
Cookware itself
generates heat.
IH (electromagnetic induction
heating) heats cookware by
causing cookware itself to
generate heat.
If electricity
fl
ows in the magnetic
coils underneath the top plate,
magnetic lines of force are produced.
When the magnetic lines of force
pass through metallic cookware, an
eddy current is induced, and the heat
generated by the electrical resistance
of the cookware is used for heating.
IH Cooking Mechanism
