Panasonic KXTG5055W - 5.8GHZ FHSS CDL Operating Instructions Manual Download Page 46

Page: 46 / 64

Direct Commands

During programming:

When “

” is displayed, press the right soft key

to save the new settings

To exit programming

, press

[OFF]

•

If you press the direct command incorrectly, press

[OFF]

, then re-enter

programming mode by pressing

[MENU]

• For function details, see the corresponding pages.
*

You need to first download melody data from the openLCR web site.

This feature can be used to activate Caller IQ. See the leaflet included with this

unit for more information.

For openLCR subscribers only.

For openLCR subscribers only. If information is not downloaded to your unit, “

Get

new Info.?

” will be displayed. To download information, see page 53.

After pressing

[7]

, make sure “

View Info.?

” is displayed, then press the next

command. If Caller IQ is turned off, “

Turn CIQ on?

” is displayed after pressing

[7]

SAVE

Summary of Contents for KXTG5055W - 5.8GHZ FHSS CDL

































































Search results

Summary of Contents for KXTG5055W - 5.8GHZ FHSS CDL

Reviews:

Related manuals for KXTG5055W - 5.8GHZ FHSS CDL

Brands by name

Popular brands

Panasonic KXTG5055W - 5.8GHZ FHSS CDL, Operating Instructions Manual

Search results

Summary of Contents for KXTG5055W - 5.8GHZ FHSS CDL

Reviews:

Related manuals for KXTG5055W - 5.8GHZ FHSS CDL

Brands by name

Popular brands