Special Features
40
Key Tone
You can select whether or not the handset keys will sound tones (key tone,
confirmation tone, error tone). The factory preset is ON.
Re-registering the Handset
If “
No link to base. Move closer to base and try again.
” is
displayed even when using the handset near the base unit, the handset may have
lost communication with the base unit. You need to re-register the handset to that
base unit.
• Have both the handset and base unit nearby during registration.
• Follow steps 1 and 2 listed below. You have about 1 minute to complete
them.
•
If the handset beeps 3 times and “
Error!!
” is displayed, an error occurred. Try
again from step 1.
•
You can stop registration by pressing
[OFF]
on the handset and pressing
[LOCATOR]
on the base unit.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
Scroll to “
Key tone
” by pressing
[
d
]
or
[
B
]
,
then press the soft key (
).
4
Select “
Off
” or “
On
” by pressing
[
d
]
or
[
B
]
.
5
Press the soft key (
), then press
[OFF]
.
1
Base unit:
Press and hold
[LOCATOR]
for 3 seconds.
•
The CHARGE indicator flashes.
2
Handset: Press and hold
[FLASH/CALL
WAIT]
until “
Handset Registering
” is
displayed.
•
After registration is complete, a long beep
sounds from the handset.
Handset
SELECT
Initial setting
SELECT
Key tone
Key tone
:On
SAVE
Handset & Base Unit
SP
I
PRIVACY
1
Handset
Registering
IN USE
SP
I
PRIVACY
1
Handset [1]
Registered
IN USE
