Panasonic KXTG2226W - 2.4GHZ DIGITAL PHONE Service Manual Download Page 88

Page: 88 / 110

Ref. No.

Part No.

Part Name & Description

Remarks

PQLV19Z

AC ADAPTOR

PQJA10075Z

CORD, TELEPHONE

PQKE10367Z1

HANGER, BELT CLIP (for KX-TG2226B)

PC+ABS-HB

PQKE10367Z2

HANGER, BELT CLIP (for KX-TG2226S)

PC+ABS-HB

PQKE10367Z3

HANGER, BELT CLIP (for KX-TG2226W)

PC+ABS-HB

PQKL10057Z1

STAND, WALL MOUNT ADAPTOR (for KX-TG2226B)(for KX-

TG2226S)

ABS-HB

PQKL10057Z2

STAND, WALL MOUNT ADAPTOR (for KX-TG2226W)

ABS-HB

RP-TCA91P1-K

HEADPHONE (for KX-TG2226B)

RP-TCA91P1-S

HEADPHONE (for KX-TG2226S)

RP-TCA91P1-W

HEADPHONE (for KX-TG2226W)

PQQX13658Z

INSTRUCTION BOOK

PQQW12876Z

QUICK GUIDE (for English)

PQQW12877Z

QUICK GUIDE (for Spanish)

PQQW12842Z

LEAFLET

A10

PQQT22628Z

LABEL, TAM

A11

PQQW13114Z

LEAFLET

XZB23X30A06

PROTECTION COVER (for Base Unit)

XZB08X30A04

PROTECTION COVER (for Handset)

PQPK13990Z

GIFT BOX (for KX-TG2226B)

PQPK13991Z

GIFT BOX (for KX-TG2226S)

PQPK14044Z

GIFT BOX (for KX-TG2226W)

PQPN11707Z

ACCESSORY BOX

PQXDDS400-8

LABEL, SECURITY TAG

ABS-HB

30. FOR SCHEMATIC DIAGRAM

30.1. Base Unit (

SCHEMATIC DIAGRAM (BASE UNIT)

)

Note:

1. DC voltage measurements are taken with voltmeter from the

negative voltage line.

2. This schematic diagram may be modified at any time with the

development of new technology.

30.2. Handset (

SCHEMATIC DIAGRAM (HANDSET)

)

Note:

1. DC voltage measurements are taken with an oscilloscope or a

tester with a ground.

Summary of Contents for KXTG2226W - 2.4GHZ DIGITAL PHONE















































































































Search results

Summary of Contents for KXTG2226W - 2.4GHZ DIGITAL PHONE

Reviews:

Related manuals for KXTG2226W - 2.4GHZ DIGITAL PHONE

Brands by name

Popular brands

Panasonic KXTG2226W - 2.4GHZ DIGITAL PHONE, Service Manual

Search results

Summary of Contents for KXTG2226W - 2.4GHZ DIGITAL PHONE

Reviews:

Related manuals for KXTG2226W - 2.4GHZ DIGITAL PHONE

Brands by name

Popular brands