Panasonic KXMB2000E, Operating Instructions Manual

Page: 34 / 120

5.1 Making a copy
5.1.1 Using the scanner glass
M Fax Auto Answer N
M Resolution N
M Contrast N
M Stop N M Start N
M Copy Size N
M Copy N
M Set NMCNMDNMEN
1
If the M Copy N light is OFF, turn it ON by pressing
M Copy N .
2
Set the original (page 19).
3
If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
R To select the copy size, see page 34.
R To select the resolution, see page 34.
R To select the contrast, see page 34.
4
If necessary, enter the number of copies (up to 99).
5
M Start N
R The unit will start copying.
6
After you finish copying, press M Stop N to reset the
settings you set in step 3 and 4.
Note:
R To stop copying, see page 75.
R You can change the default operation mode (feature
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on
page 59) (KX-MB2025/KX-MB2030 only).
R If the M Fax Auto Answer N light is ON, the unit can
receive faxes automatically even when in the copy
mode (KX-MB2025/KX-MB2030 only).
To select the copy size
1.
Press M Copy Size N repeatedly to select “
ORIGINAL
SIZE
” .
2. Press MCN or MDN repeatedly to select the size of your
original document. A M Set N
3. Press MCN or MDN repeatedly to select the size of
recording paper size.
R When “
#2
” is selected, you can change the
recording paper size by pressing MEN repeatedly.
R The appropriate zoom rate will be set
automatically. Some copying features cannot be
used during zoom copy. See page 35 for
details.
4. M Set N
To select the resolution
1.
Press M Resolution N repeatedly.
– “
TEXT/PHOTO
” : For both text and photographs.
– “
TEXT
” : For text only.
– “
PHOTO
” : For photographs, shaded drawings,
etc.
2. M Set N
Note:
R You can change the default resolution (feature #461
on page 65).
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press
M Contrast N repeatedly. A M Set N
Note:
R You can hold the previous contrast setting (feature
#462 on page 59).
34
5. . Copier
5. Copier