3.
Use
[
][
]
to select the following items and enter
a password (4–10 digits):
"Current password"
: Enter the current password
(default: 00000000).
"New password"
: Enter the new password.
"Retype new password"
: Enter the new password
again.
Note
•
Please change the default login password
the first time the unit is installed.
•
Be sure to keep the password safe.
4.
Press
[G]
.
•
A dialog box to confirm the changing of settings
is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The admin menu screen is displayed.
6.
Press
[Home]
.
•
The Home screen is displayed.
Making Encryption Settings
Note
•
Be careful when changing encryption settings
because doing so may cause you to become
unable to communicate with other parties.
•
There is a danger that encryption settings will
be changed by a third party. Therefore, be
careful when managing the administrator
password and giving users the authority to
change encryption settings.
•
If an encryption key is not set, you cannot
enable encryption.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on networks
that are not secured against such actions.
1.
Login to the administrator menu (Page 102).
•
The admin menu screen is displayed.
2.
Use
[
][
]
to select
"Encryption"
and press
[Enter]
.
•
The encryption settings screen is displayed.
3.
Use
[
][
]
to select the following items for input:
"Access mode"
: Use
[
][
]
to select
"Admin"
(default) or
"User"
.
•
When
"Admin"
is selected, only the network
administrator can enable/disable encryption.
•
When
"User"
is selected, any user can enable/
disable encryption (Page 91, Page 112).
"Encryption"
: Use
[
][
]
to select whether to
enable encryption.
–
"ON"
: Encryption is enabled.
–
"OFF"
(default): Encryption is disabled.
Note
•
To select
"ON"
, specifying the encryption
•
If the
"Encryption"
setting does not match
that of the other party in a video conference
call, the video conference call will not start.
•
This setting is available only when
"Admin"
is selected for
"Access mode"
.
•
When connecting to an MCU or
non-Panasonic video conference system,
set
"Encryption"
to
"OFF"
because
encryption is not available. Encryption must
be disabled on both sides.
"Encryption Key"
: Enter an encryption key (4 to
256 characters [alphanumeric, space, symbols])
(Page 116).
Note
•
&, <, >, comma (,), double quotation mark
(") cannot be entered.
Document Version 2012-03
Operating Manual
103
Contacts and Settings
