manualshive.com logo in svg

Panasonic KX-UTG300, Operating Instructions Manual

Share
Download
Panasonic KX-UTG300 Operating Instructions Manual Download Page 77

USB Headsets

USB headsets can be used with the unit. See
Page 66 for information on supported headsets.

Note

•

Only 1 USB headset can be connected to the
unit at a time.

USB Hubs

A USB hub can be connected to the unit in order to
expand the number of devices that can be connected
to the unit. All supported USB devices can be
connected to the unit through a USB hub.

Note

•

Only 1 USB hub can be connected to the unit.

•

Depending on the number and type of devices
connected to a USB hub, an AC adaptor may
have to be connected to the USB hub in order
to power the connected devices.

USB Keyboards

A USB keyboard can be connected to the unit in order
to enter text. See Page 60 for information on using USB
keyboards.

Note

•

Only 1 USB keyboard can be connected to the
unit.

USB Flash Drives

A USB flash drive can be connected to the unit in order
to do the following:

•

Record calls (Page 25)

•

Play back recorded calls (Page 25)

•

Export call logs (Page 30)

•

Export the console log (Page 50)

•

Import screen saver images (Page 61)

Note

•

Only 1 USB flash drive can be connected to the
unit.

•

Only USB flash drives with a capacity of up to
32 GB are supported.

Setting Up the Unit

The user settings can be used to setup the unit by
configuring the settings as required. See Page 42 for
information about the settings.

Document Version  2014-11  

Operating Instructions

77

Installation and Setup

Summary of Contents for KX-UTG300













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands