Panasonic KX-UT670, Administrator'S Manual

Page: 234 / 250

Password for Web User Interface Programming
Problem Cause/Solution
I have lost the login password of the Web
user interface for the Administrator or User
account. •
Reset the password from the unit. The passwords for both
Administrator and User will be reset (
®
see 3.1.1.2 Reset
Web ID/Password ).
For security reasons, it is recommended that the
passwords are set again immediately (
®
see
4.5.2 Administrator Password or 4.5.3 Change User
Password ).
Time
Problem Cause/Solution
The time is not correct. •
Adjust the date and time of the unit. For details about the
operations, refer to the Operating Instructions on the
Panasonic Web site (
®
see Introduction ).
•
Automatic time adjustment can be enabled by configuring
the NTP synchronization and time zone settings in the
unit’s
[Settings] menu. For details, refer to the Operating
Instructions on the Panasonic Web site (
®
see
Introduction ).
•
If the time is still incorrect even after setting NTP
synchronization, check the firewall and port forwarding
settings on the router (
®
see 1.1.4 Other Network
Settings ).
SD Cards
Problem Cause/Solution
Thumbnails of images on the SD card are
not displayed, or different images are
displayed. •
The SD card was not unmounted before it was removed
from the unit. Unmount the SD card before removing it.
Additionally, follow the procedure below to display the
correct thumbnail images:
1.
Press on the Home screen, and then tap
[Settings] .
2.
Tap [SD card & phone storage] .
3.
Tap [Clear cache] .
4.
Tap [Clear and reboot] .
After the unit has rebooted the correct thumbnail images
will be displayed.
USB Devices
Problem Cause/Solution
Some keys on the USB keyboard do not
work. •
Check which keys can be used on the unit. For details,
refer to the Operating Instructions on the Panasonic Web
site (
®
see Introduction ).
234 Administrator Guide Document Version 2012-07
Section 10 Troubleshooting