Panasonic KX-UDS124 Administrator'S Manual Download

Page: 221 / 292

Description

Selects whether the SIP-CS’s hold tone or the network server’s hold
tone (Music on hold) is played when a party is put on hold.

Note

•

It is necessary to set the following parameters to play the
SIP-CS’s hold tone.

–

HOLD_TONE_FRQ

–

HOLD_TONE_GAIN

Value Range

0–1

–

0: The SIP-CS’s hold tone is played.

–

1: The network server’s hold tone (Music on hold) is played.

Default Value

4.6.2 SIP Settings

SIP_USER_AGENT

Value Format

String

Description

Specifies the text string to send as the user agent in the headers of SIP
messages.

Value Range

Max. 40 characters

Note

•

An empty string is not allowed.

•

If "{mac}" is included in this parameter, it will be replaced with
the SIP-CS’s MAC address in lower-case.

•

If "{MAC}" is included in this parameter, it will be replaced with
the SIP-CS’s MAC address in upper-case.

•

If "{MODEL}" is included in this parameter, it will be replaced
with the SIP-CS’s model name.

•

If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the SIP-CS.

Default Value

Panasonic_{MODEL}/{fwver} ({mac})

PHONE_NUMBER_PSy_n

Parameter Name Example

PHONE_NUMBER_PS1_1

PHONE_NUMBER_PS1_2

PHONE_NUMBER_PS2_1

PHONE_NUMBER_PS2_2

PHONE_NUMBER_PS255_1

PHONE_NUMBER_PS255_2

Value Format

String

Document Version 2013-03

Administrator Guide

221

4.6.2 SIP Settings

Summary of Contents for KX-UDS124





































































































































































































































































































Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands

Panasonic KX-UDS124, Administrator'S Manual

Search results

Summary of Contents for KX-UDS124

Reviews:

Related manuals for KX-UDS124

Brands by name

Popular brands