Panasonic KX-TVP200BX Service Manual Download Page 185

Page: 185 / 448

3-30 Features

Features and Services

- The prompts in parentheses ( ) are heard only when that option is activated.

Note:

The above prompt can be recorded in other languages. Refer to "Recording
User Prompts" in Chapter 6.

More
Information

• Hold

In case the line is busy, the caller may hold a call before entering this
service. Then the VPS will call the extension again later on.

Conditions

• This feature is available to Subscribers only.
• If the specified extension is not a Subscriber, callers will always hear the

following three options.
a) Leaving a message
b) Returning to the Automated Attendant top menu
c) Calling operators

• If none of the options is activated, the call will be disconnected.

Subscriber

• Setting up a Covering Extension (Subscriber's Guide page 5-3)
• Setting the Incomplete Call Handling Status (Subscriber's Guide page 5-4)

ntercom Paging (D-PITS Only)

Feature Ref.

Call Transfer Status
Incomplete Call Handling Service

Description

Callers can page Subscribers through built-in speakers and external paging
equipment.

Conditions

• This feature is available only when the D-PITS Integration with a Panasonic

KX-TD series telephone system is activated.

• The VPS must be integrated with your PBX in the specified mode.
• Speakers used for paging are determined by System Programming.

S.A.

• “Intercom Paging Group” (page 4-30)
• Intercom Paging Parameter (page 4-71)
• “Integration Mode” (page 4-81)

S.M.

• “Intercom Paging Group Number” (page 5-9)

Subscriber

• Setting the Call Transfer Status (Subscriber's Guide page 5-2)
• Setting the Incomplete Call Handling Status (Subscriber's Guide page 5-4)

Summary of Contents for KX-TVP200BX

































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP200BX

Reviews:

Related manuals for KX-TVP200BX

Brands by name

Popular brands

Panasonic KX-TVP200BX, Service Manual

Search results

Summary of Contents for KX-TVP200BX

Reviews:

Related manuals for KX-TVP200BX

Brands by name

Popular brands