Panasonic KX-TS820FX, Operating Instructions Manual

Page: 7 / 44

7
Preparation
Connections
Connect the handset cord ( 1 ) to the handset and the unit. Connect the
telephone line cord until it clicks into the unit and telephone line jack ( 2 ).
After line connection, lift the handset to check for a dial tone.
≥
Use only a Panasonic handset for KX-TS820FX.
≥
Use only the supplied telephone line cord. Using another telephone line cord may not
allow the unit to work properly.
* For DSL/ADSL service users
Please attach a DSL /ADSL filter (contact your DSL /ADSL provider) to the telephone line
between the unit and the telephone line jack in the event of the following:
s
noise is heard during conversations.
Setting up the unit before use
Dialing mode
If you cannot make calls, change this setting according to your telephone line
service.
The default setting is TONE.
TONE: For tone dial service.
PULSE: For rotary/pulse dial service.
1
Lift the handset.
2
{
PROGRAM
}
>
{
REDIAL
}
>
{
3
}
3
To select TONE, press
{
1
}
.
OR
To select PULSE, press
{ 2 } .
4
{
PROGRAM
}
≥
A long beep sounds.
5
When finished, hang up.
LINE
1
2
DSL /ADSL filter *
To single-line telephone jack
KX-TS820FX.book Page 7 Wednesday, January 13, 2010 11:55 AM