Panasonic KX-TS4200 Operating Instructions Manual Download Page 59

Page: 59 / 68

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

Phonebook

You cannot have a
conversation using
the headset.

Make sure that

{

HEADSET

}

is pressed.

Make sure that the headset is plugged into the headset
jack properly (see “Connecting the optional headset to the
unit” on page 53).

During a power
failure, you cannot
make or answer a
call.

Make sure that a battery has been installed properly (see
“Battery installation” on page 12).

The battery may have been discharged. In that case,
replace the battery with a new one (see “Battery
replacement” on page 12).

The intercom does not
work.

DSL Internet connection and KX-TS4100/KX-TS4200/
KX-TS4300 Intercom work at similar frequencies. Please
contact Panasonic at 1-800-211-PANA (1-800-211-7262)
for special wiring configurations.

You cannot page
other extension.

The unit is in use. Try again later.

You cannot answer the
transferred call even
if the display shows
“

Transfer From

”.

The transferred call was disconnected before you
answered it.

Problem

Cause/solution

You cannot store a
name and phone
number in the
phonebook.

Do not pause for over 30 seconds while programming.

Make sure that the unit is in standby mode.

The display returns to
standby mode while
viewing the
phonebook.

Do not pause for over 30 seconds while searching.

Problem

Cause/solution

KXT4200̲OI.book Page 59 Friday, September 1, 2006 8:53 AM

Summary of Contents for KX-TS4200





































































Search results

Summary of Contents for KX-TS4200

Reviews:

Brands by name

Popular brands

Panasonic KX-TS4200, Operating Instructions Manual

Search results

Summary of Contents for KX-TS4200

Reviews:

Brands by name

Popular brands