9
Functional section
Placing Calls
When placing calls you can confi rm that the number was dialed correctly before calling (pre-dialing) by
entering the number, then press
or lift the handset on the TPA65C.
Cancel Calls
To cancel dialing, press
or return handset on TPA65C.
Answering Calls
To answer an incoming call press
or lift handset on TPA65C.
Ending a Call
To end a call press
or replace handset on TPA65C.
Hands-free/Speakerphone Mode In hands-free mode, you can talk and hear the other party in a
conversation without using the handset. This mode is useful for performing other tasks during a
conversation, such as writing. If you press
(on TPA-60) or
(on TPA-65) during a conversation, you
can enable hands-free mode.
Cancelling hands-free mode
To cancel hands-free mode press
or
during a conversation.
Call Forwarding/DND
To have incoming calls automatically forwarded to another destination follow these steps:
1. In standby mode, press
Function and then FWD or DND
2. Select the type of FWD or DND setting to apply.
The settings are as follows:
• DND: When Do Not Disturb is enabled all incoming calls are automatically rejected.
• Fwd(All): When Forward All Calls is enabled all incoming calls are forwarded.
• Fwd(Busy): When Forward Busy is enabled Incoming calls are forwarded only when your extension is in
use.
• Fwd(NA): When Forward No answer is enabled an incoming call is forwarded if you do not answer the
call within a certain amount of time.
Note:
If a Forward setting is selected, enter a new forward destination number, or confi rm and modify a
previously set forward destination number
Listening to Voicemail Messages
When you receive a Voice Message, “Voice MSG” is displayed, and
will appear.
You can check your new messages by accessing your mailbox. Press and hold
(on KX-TPA60) or
(on KX-TPA65C)
Summary of Contents for KX TPA 65
Page 14: ......
